The ferrule ball valve, also called the double ferrule ball valve, is connected with the pipe by ferrule to prevent water leakage and is made of metal. When the nut is tightened, the ferrule is under pressure, so that its blade bites into the outer wall of the pipe, and the outer cone of the ferrule is in close contact with the inner cone of the joint under pressure, so leakage can be reliably prevented.
The ferrule ball valve is also called the ferrule ball valve, the double ferrule ball valve, and the snap ring ball valve.
Nominal diameter: Ф6-Ф22.
Nominal pressure: 1.6Mpa-6.4Mpa.
Applicable medium: water, oil, gas and some corrosive liquids (W, C, O).
Applicable temperature: -20~350℃.
Manufacturing material: 20#, 201, 304, 316, 316L, etc.
Manufacturing standard: GB/T12224-1989, JB/T7747-1995.
Connection method: thread, ferrule.
Card sleeve ball valve model: QGQY1.
Card sleeve ball valve handle mode: stainless steel strip form, rubber sleeves are red, blue, black, and yellow.
Card sleeve ball valve connection methods: card sleeve type, internal thread type, external thread type.
The structural features of the ferrule ball valve: one end internal thread type, one end ferrule type, and both ends ferrule type.
(责任编辑：超级管理员)
